Xtramus NuTAP-S61 V1.2 Bedienungsanleitung PDF herunterladen (Seite 8)

Left/Right Panel

Description – Left Panel Power Jack

Power Jack

12V DC Power Jack × 1

Reset Button

To reset NuTAP-S61’s settings to default value, please press and hold the Reset

Button for 4 seconds. NuTAP-S61 will reset all settings to default after a long beep.

Back Panel & Ports

Description – Back Panel & Ports

Console Port

UTP Port for Firmware/FPGA Upgrading, Configuration Setting, and NuTAP-S61 Power

Supply＊.

Network Port

A0/A1

These two 10/100 Mbps Full Ethernet UTP Network Ports can transmit/receive test

packets generated by NuTAP-S61.

Monitor Port

M0/M1

These two 10/100 Mbps Full Ethernet UTP Monitor Ports can monitor/capture test

packets transmitted from Network Ports.

＊Note: When using Console Port as NuTAP-S61’s power source, please use the RJ45-to-USB cable that comes

with NuTAP-S61 package. Extending the length of RJ45-to-USB cable might cause NuTAP-S61 power insufficient.

Website: www.Xtramus.com

XTRAMUS TECHNOLOGIES

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 74 75

Keine Kommentare

Xtramus NuTAP-S61 V1.2 Bedienungsanleitung Seite 8