Xtramus NuApps-MultiUnits-RM Ver1.5 Bedienungsanleitung

NuApps-MultiUnits-RM User’s Manual USM Ver 1.5

C. Packet ...234 D. Learni

5.10. Flow Control Test (FC) _ PT2-FC-100H-10H (100Mbps Half ↔ 10Mbps Half) Layer2 100Mbps Half Duplex to 10Mbps Half Duplex Flow Control tests the p

• Port Select…: Clicking this option will pop up a Port Select window allowing the selection of the ports to be used on the task. Please click the

B. Media Type • Minimum Waiting Time: NuApps-MultiUnits-RM will halt at least for the Minimum Waiting Time you input here during auto-negotiation p

• Packet Setting: You can set how packets will be transmitted in this field. ¾ Transmit by time: The system will transmit packet during the set a

D. Learning • Enable Learning: As shown in the figures down below, enabling this function allows learning packets transmitted to the DUT before tes

E. Criteria • Allowable Tolerance: You can set the allowable amount packet loss/excess here. ¾ Total Packet Loss: If packet loss (including erro

5.11. Flow Control Test (FC) _ PT2-FC-10F-100F (10Mbps Full ↔ 100Mbps Full) Layer2 10Mbps Full Duplex to 100Mbps Full Duplex Flow Control tests the p

• Port Select…: Clicking this option will pop up a Port Select window allowing the selection of the ports to be used on the task. Please click the

B. Media Type • Minimum Waiting Time: NuApps-MultiUnits-RM will halt at least for the Minimum Waiting Time you input here during auto-negotiation p

down below. • Packet Setting: You can set how packets will be transmitted in this field. ¾ Transmit by time: The system will transmit packet du

1. NuApps-MultiUnits-RM Overview 1.1. General Description of NuApps-MultiUnits-RM NuApps-MultiUnits-RM is a utility software that displays up to 8

D. Learning • Enable Learning: As shown in the figures down below, enabling this function allows learning packets transmitted to the DUT before tes

E. Criteria • Allowable Tolerance: You can set the allowable amount packet loss/excess here. ¾ Total Packet Loss: If packet loss (including erro

5.12. Flow Control Test (FC) _ PT2-FC-100F-10F (100Mbps Full ↔ 10Mbps Full) Layer2 100Mbps Full Duplex to 10Mbps Full Duplex Flow Control tests the p

• Port Select…: Clicking this option will pop up a Port Select window allowing the selection of the ports to be used on the task. Please click the

B. Media Type • Minimum Waiting Time: NuApps-MultiUnits-RM will halt at least for the Minimum Waiting Time you input here during auto-negotiation p

down below. • Packet Setting: You can set how packets will be transmitted in this field. ¾ Transmit by time: The system will transmit packet du

D. Learning • Enable Learning: As shown in the figures down below, enabling this function allows learning packets transmitted to the DUT before tes

E. Criteria • Allowable Tolerance: You can set the allowable amount packet loss/excess here. ¾ Total Packet Loss: If packet loss (including erro

5.13. Flow Control Test (FC) _ PT2-FC-100F-1G (100Mbps Full ↔ 1000Mbps Full) Layer2 100Mbps Full Duplex to 1000Mbps Full Duplex Flow Control tests th

• Port Select…: Clicking this option will pop up a Port Select window allowing the selection of the ports to be used on the task. Please click the

1.2. Function Description_ Performance Task in Layer 2 (PT2) Built-in tasks in NuApps-MultiUnits-RM include Unicast, Flow Control, Broadcast, Filter

B. Media Type • Minimum Waiting Time: NuApps-MultiUnits-RM will halt at least for the Minimum Waiting Time you input here during auto-negotiation p

down below. • Packet Setting: You can set how packets will be transmitted in this field. ¾ Transmit by time: The system will transmit packet du

D. Learning • Enable Learning: As shown in the figures down below, enabling this function allows learning packets transmitted to the DUT before tes

E. Criteria • Allowable Tolerance: You can set the allowable amount packet loss/excess here. ¾ Total Packet Loss: If packet loss (including erro

5.14. Flow Control Test (FC) _ PT2-FC-1G-100F (1000Mbps Full ↔ 100Mbps Full) Layer2 1000Mbps Full Duplex to 100Mbps Full Duplex Flow Control tests th

• Port Select…: Clicking this option will pop up a Port Select window allowing the selection of the ports to be used on the task. Please click the

B. Media Type • Minimum Waiting Time: NuApps-MultiUnits-RM will halt at least for the Minimum Waiting Time you input here during auto-negotiation p

down below. • Packet Setting: You can set how packets will be transmitted in this field. ¾ Transmit by time: The system will transmit packet du

D. Learning • Enable Learning: As shown in the figures down below, enabling this function allows learning packets transmitted to the DUT before tes

E. Criteria • Allowable Tolerance: You can set the allowable amount packet loss/excess here. ¾ Total Packet Loss: If packet loss (including erro

1.2.3. Flow Control Test (FC) Perform flow control test on DUT in layer 2 with different speeds, mode and various configurations. It tests the perfor

5.15. Flow Control Test (FC) _ PT2-FC-1G-10G (1000Mbps Full ↔ 10Gbps Full) Layer2 1000Mbps Full Duplex to 10Gbps Full Duplex Flow Control tests the p

• Port Select…: Clicking this option will pop up a Port Select window allowing the selection of the ports to be used on the task. Please click the

B. Media Type • Minimum Waiting Time: NuApps-MultiUnits-RM will halt at least for the Minimum Waiting Time you input here during auto-negotiation p

down below. • Packet Setting: You can set how packets will be transmitted in this field. ¾ Transmit by time: The system will transmit packet du

D. Learning • Enable Learning: As shown in the figures down below, enabling this function allows learning packets transmitted to the DUT before tes

E. Criteria • Allowable Tolerance: You can set the allowable amount packet loss/excess here. ¾ Total Packet Loss: If packet loss (including erro

5.16. Flow Control Test (FC) _ PT2-FC-10G-1G (10G Full ↔ 1000Mbps Full) Layer2 10Gbps Full Duplex to 1000Mbps Full Duplex Flow Control tests the perf

• Port Select…: Clicking this option will pop up a Port Select window allowing the selection of the ports to be used on the task. Please click the

B. Media Type • Minimum Waiting Time: NuApps-MultiUnits-RM will halt at least for the Minimum Waiting Time you input here during auto-negotiation p

down below. • Packet Setting: You can set how packets will be transmitted in this field. ¾ Transmit by time: The system will transmit packet du

1.2.5. Filter Test (FT) This filter test should filter all packets with the same source MAC address and destination MAC Address. For this test, test

D. Learning • Enable Learning: As shown in the figures down below, enabling this function allows learning packets transmitted to the DUT before tes

E. Criteria • Allowable Tolerance: You can set the allowable amount packet loss/excess here. ¾ Total Packet Loss: If packet loss (including erro

5.17. Broadcast Test (BC) _ PT2-BC-10H (10Mbps, Half Duplex) Layer 2 10Mbps Half Duplex Broadcast Performance test is to transmit Broadcast streams t

• Port Select…: Clicking this option will pop up a Port Select window allowing the selection of the ports to be used on the task. Please click the

B. Media Type • Minimum Waiting Time: NuApps-MultiUnits-RM will halt at least for the Minimum Waiting Time you input here during auto-negotiation p

down below. • Packet Setting: You can set how packets will be transmitted in this field. ¾ Transmit by time: The system will transmit packet du

D. Learning • Enable Learning: As shown in the figures down below, enabling this function allows learning packets transmitted to the DUT before tes

E. Criteria • Allowable Tolerance: You can set the allowable amount packet loss/excess here. ¾ Total Packet Loss: If packet loss (including erro

5.18. Broadcast Test (BC) _ PT2-BC-10F (10Mbps, Full Duplex) Layer 2 10Mbps Full Duplex Broadcast Performance test is to transmit Broadcast streams t

• Port Select…: Clicking this option will pop up a Port Select window allowing the selection of the ports to be used on the task. Please click the

2. Installing and Uninstalling NuApps-MultiUnits-RM Please follow the steps down below to install NuApps-MultiUnits-RM. Installing NuApps-MultiUnits-

B. Media Type • Minimum Waiting Time: NuApps-MultiUnits-RM will halt at least for the Minimum Waiting Time you input here during auto-negotiation p

down below. • Packet Setting: You can set how packets will be transmitted in this field. ¾ Transmit by time: The system will transmit packet du

D. Learning • Enable Learning: As shown in the figures down below, enabling this function allows learning packets transmitted to the DUT before tes

E. Criteria • Allowable Tolerance: You can set the allowable amount packet loss/excess here. ¾ Total Packet Loss: If packet loss (including erro

5.19. Broadcast Test (BC) _ PT2-BC-100H (100Mbps, Half Duplex) Layer 2 100Mbps Half Duplex Broadcast Performance test is to transmit Broadcast stream

• Port Select…: Clicking this option will pop up a Port Select window allowing the selection of the ports to be used on the task. Please click the

B. Media Type • Minimum Waiting Time: NuApps-MultiUnits-RM will halt at least for the Minimum Waiting Time you input here during auto-negotiation p

down below. • Packet Setting: You can set how packets will be transmitted in this field. ¾ Transmit by time: The system will transmit packet du

D. Learning • Enable Learning: As shown in the figures down below, enabling this function allows learning packets transmitted to the DUT before tes

E. Criteria • Allowable Tolerance: You can set the allowable amount packet loss/excess here. ¾ Total Packet Loss: If packet loss (including erro

Installing NuApps-MultiUnits-RM 4. Click the Change… button to install the program to another folder, or click Next button to install the program i

5.20. Broadcast Test (BC) _ PT2-BC-100F (100Mbps, Full Duplex) Layer 2 100Mbps Full Duplex Broadcast Performance test is to transmit Broadcast stream

• Port Select…: Clicking this option will pop up a Port Select window allowing the selection of the ports to be used on the task. Please click the

B. Media Type • Minimum Waiting Time: NuApps-MultiUnits-RM will halt at least for the Minimum Waiting Time you input here during auto-negotiation p

down below. • Packet Setting: You can set how packets will be transmitted in this field. ¾ Transmit by time: The system will transmit packet du

D. Learning • Enable Learning: As shown in the figures down below, enabling this function allows learning packets transmitted to the DUT before tes

E. Criteria • Allowable Tolerance: You can set the allowable amount packet loss/excess here. ¾ Total Packet Loss: If packet loss (including erro

5.21. Broadcast Test (BC) _ PT2-BC-1G (1000Mbps, Full Duplex) Layer 2 1000Mbps Full Duplex Broadcast Performance test is to transmit Broadcast stream

• Port Select…: Clicking this option will pop up a Port Select window allowing the selection of the ports to be used on the task. Please click the

B. Media Type • Minimum Waiting Time: NuApps-MultiUnits-RM will halt at least for the Minimum Waiting Time you input here during auto-negotiation p

down below. • Packet Setting: You can set how packets will be transmitted in this field. ¾ Transmit by time: The system will transmit packet du

Installing NuApps-MultiUnits-RM 7. NuApps-MultiUnits-RM installation completes. Click Finish button to exit. 8. If your PC does not have WinPcap

D. Learning • Enable Learning: As shown in the figures down below, enabling this function allows learning packets transmitted to the DUT before tes

E. Criteria • Allowable Tolerance: You can set the allowable amount packet loss/excess here. ¾ Total Packet Loss: If packet loss (including erro

5.22. Broadcast Test (BC) _ PT2-BC-10G (10Gbps, Full Duplex) Layer 2 10Gbps Full Duplex Broadcast Performance test is to transmit Broadcast streams t

• Port Select…: Clicking this option will pop up a Port Select window allowing the selection of the ports to be used on the task. Please click the

B. Media Type • Minimum Waiting Time: NuApps-MultiUnits-RM will halt at least for the Minimum Waiting Time you input here during auto-negotiation p

down below. • Packet Setting: You can set how packets will be transmitted in this field. ¾ Transmit by time: The system will transmit packet du

D. Learning • Enable Learning: As shown in the figures down below, enabling this function allows learning packets transmitted to the DUT before tes

E. Criteria • Allowable Tolerance: You can set the allowable amount packet loss/excess here. ¾ Total Packet Loss: If packet loss (including erro

5.23. Filter Test (FT) _ PT2-FT-10H (10Mbps, Half Duplex) Layer 2 10Mbps Half Duplex Filter Performance Test transmit test streams with the same DA a

• Port Select…: Clicking this option will pop up a Port Select window allowing the selection of the ports to be used on the task. Please click the

Installing NuApps-MultiUnits-RM 10. Review the license agreement before installing. Click I Agree button to continue. It is necessary to accept the

B. Media Type • Minimum Waiting Time: NuApps-MultiUnits-RM will halt at least for the Minimum Waiting Time you input here during auto-negotiation p

• Packet Setting: You can set how packets will be transmitted in this field. ¾ Transmit by time: The system will transmit packet during the set a

D. Learning • Enable Learning: As shown in the figures down below, enabling this function allows learning packets transmitted to the DUT before tes

E. Criteria • Allowable Tolerance: You can set the allowable amount packet loss/excess here. ¾ Total Packet Loss: If packet loss (including erro

5.24. Filter Test (FT) _ PT2-FT-10F (10Mbps, Full Duplex) Layer 2 10Mbps Full Duplex Filter Performance Test transmit test streams with the same DA a

• Port Select…: Clicking this option will pop up a Port Select window allowing the selection of the ports to be used on the task. Please click the

B. Media Type • Minimum Waiting Time: NuApps-MultiUnits-RM will halt at least for the Minimum Waiting Time you input here during auto-negotiation p

down below. • Packet Setting: You can set how packets will be transmitted in this field. ¾ Transmit by time: The system will transmit packet du

D. Learning • Enable Learning: As shown in the figures down below, enabling this function allows learning packets transmitted to the DUT before tes

E. Criteria • Allowable Tolerance: You can set the allowable amount packet loss/excess here. ¾ Total Packet Loss: If packet loss (including erro

You can uninstall NuApps-MultiUnits-RM by: Uninstalling NuApps-MultiUnits-RM ¾ Click Start Æ Programs Æ NuStreams Æ NuApps-MultiUnits-RM Æ Uninstall

5.25. Filter Test (FT) _ PT2-FT-100H (100Mbps, Half Duplex) Layer 2 100Mbps Half Duplex Filter Performance Test transmit test streams with the same D

• Port Select…: Clicking this option will pop up a Port Select window allowing the selection of the ports to be used on the task. Please click the

B. Media Type • Minimum Waiting Time: NuApps-MultiUnits-RM will halt at least for the Minimum Waiting Time you input here during auto-negotiation p

down below. • Packet Setting: You can set how packets will be transmitted in this field. ¾ Transmit by time: The system will transmit packet du

D. Learning • Enable Learning: As shown in the figures down below, enabling this function allows learning packets transmitted to the DUT before tes

E. Criteria • Allowable Tolerance: You can set the allowable amount packet loss/excess here. ¾ Total Packet Loss: If packet loss (including erro

5.26. Filter Test (FT) _ PT2-FT-100F (100Mbps, Full Duplex) Layer 2 100Mbps Full Duplex Filter Performance Test transmit test streams with the same D

• Port Select…: Clicking this option will pop up a Port Select window allowing the selection of the ports to be used on the task. Please click the

B. Media Type • Minimum Waiting Time: NuApps-MultiUnits-RM will halt at least for the Minimum Waiting Time you input here during auto-negotiation p

down below. • Packet Setting: You can set how packets will be transmitted in this field. ¾ Transmit by time: The system will transmit packet du

Foreword Copyright Copyright © 2012 Xtramus Technologies, all rights reserved. The information contained in this document is the property of Xtramus

3. NuApps-MultiUnits-RM Function Overview 3.1. Starting NuApps-MultiUnits-RM Before starting NuApps-MultiUnits-RM, the DUT, your PC, and NuStreams-20

D. Learning • Enable Learning: As shown in the figures down below, enabling this function allows learning packets transmitted to the DUT before tes

E. Criteria • Allowable Tolerance: You can set the allowable amount packet loss/excess here. ¾ Total Packet Loss: If packet loss (including erro

5.27. Filter Test (FT) _ PT2-FT-1G (1000Mbps, Full Duplex) Layer 2 1000Mbps Full Duplex Filter Performance Test transmit test streams with the same D

• Port Select…: Clicking this option will pop up a Port Select window allowing the selection of the ports to be used on the task. Please click the

B. Media Type • Minimum Waiting Time: NuApps-MultiUnits-RM will halt at least for the Minimum Waiting Time you input here during auto-negotiation p

down below. • Packet Setting: You can set how packets will be transmitted in this field. ¾ Transmit by time: The system will transmit packet du

D. Learning • Enable Learning: As shown in the figures down below, enabling this function allows learning packets transmitted to the DUT before tes

E. Criteria • Allowable Tolerance: You can set the allowable amount packet loss/excess here. ¾ Total Packet Loss: If packet loss (including erro

5.28. Filter Test (FT) _ PT2-FT-10G (10Gbps, Full Duplex) Layer 2 10Gbps Full Duplex Filter Performance Test transmit test streams with the same DA a

• Port Select…: Clicking this option will pop up a Port Select window allowing the selection of the ports to be used on the task. Please click the

If your PC is not connected with NuStreams-2000i/600i, you can still run NuApps-MultiUnits-RM under Demo Mode. Almost all NuApps-MultiUnits-RM ‘s fun

B. Media Type • Minimum Waiting Time: NuApps-MultiUnits-RM will halt at least for the Minimum Waiting Time you input here during auto-negotiation p

down below. • Packet Setting: You can set how packets will be transmitted in this field. ¾ Transmit by time: The system will transmit packet du

D. Learning • Enable Learning: As shown in the figures down below, enabling this function allows learning packets transmitted to the DUT before tes

E. Criteria • Allowable Tolerance: You can set the allowable amount packet loss/excess here. ¾ Total Packet Loss: If packet loss (including erro

5.29. CRC Error Test (CRC) _ PT2-CRC-10H (10Mbps, Half Duplex) Layer 2 10Mbps Half Duplex CRC check Performance Test is to find if DUT can filter and

• Port Select…: Clicking this option will pop up a Port Select window allowing the selection of the ports to be used on the task. Please click the

B. Media Type • Minimum Waiting Time: NuApps-MultiUnits-RM will halt at least for the Minimum Waiting Time you input here during auto-negotiation p

• Packet Setting: You can set how packets will be transmitted in this field. ¾ Transmit by time: The system will transmit packet during the set a

D. Learning • Enable Learning: As shown in the figures down below, enabling this function allows learning packets transmitted to the DUT before tes

E. Criteria • Allowable Tolerance: You can set the allowable amount packet loss/excess here. ¾ Total Packet Loss: If packet loss (including erro

Please follow the steps down below to start NuApps-MultiUnits-RM and NuServer properly. Starting NuServer / NuApps-MultiUnits-RM When you activate t

5.30. CRC Error Test (CRC) _ PT2-CRC-10F (10Mbps, Full Duplex) Layer 2 10Mbps Full Duplex CRC check Performance Test is to find if DUT can filter and

• Port Select…: Clicking this option will pop up a Port Select window allowing the selection of the ports to be used on the task. Please click the

B. Media Type • Minimum Waiting Time: NuApps-MultiUnits-RM will halt at least for the Minimum Waiting Time you input here during auto-negotiation p

down below. • Packet Setting: You can set how packets will be transmitted in this field. ¾ Transmit by time: The system will transmit packet du

D. Learning • Enable Learning: As shown in the figures down below, enabling this function allows learning packets transmitted to the DUT before tes

E. Criteria • Allowable Tolerance: You can set the allowable amount packet loss/excess here. ¾ Total Packet Loss: If packet loss (including erro

5.31. CRC Error Test (CRC) _ PT2-CRC-100H (100Mbps, Half Duplex) Layer 2 100Mbps Half Duplex CRC check Performance Test is to find if DUT can filter

• Port Select…: Clicking this option will pop up a Port Select window allowing the selection of the ports to be used on the task. Please click the

B. Media Type • Minimum Waiting Time: NuApps-MultiUnits-RM will halt at least for the Minimum Waiting Time you input here during auto-negotiation p

down below. • Packet Setting: You can set how packets will be transmitted in this field. ¾ Transmit by time: The system will transmit packet du

NuServer will connect to the daughter boards, and NuApps-MultiUnits-RM will start as well. For security reasons, NuApps-MultiUnits-RM requires Ac

D. Learning • Enable Learning: As shown in the figures down below, enabling this function allows learning packets transmitted to the DUT before tes

E. Criteria • Allowable Tolerance: You can set the allowable amount packet loss/excess here. ¾ Total Packet Loss: If packet loss (including erro

5.32. CRC Error Test (CRC) _ PT2-CRC-100F (100Mbps, Full Duplex) Layer 2 100Mbps Full Duplex CRC check Performance Test is to find if DUT can filter

• Port Select…: Clicking this option will pop up a Port Select window allowing the selection of the ports to be used on the task. Please click the

B. Media Type • Minimum Waiting Time: NuApps-MultiUnits-RM will halt at least for the Minimum Waiting Time you input here during auto-negotiation p

down below. • Packet Setting: You can set how packets will be transmitted in this field. ¾ Transmit by time: The system will transmit packet du

D. Learning • Enable Learning: As shown in the figures down below, enabling this function allows learning packets transmitted to the DUT before tes

E. Criteria • Allowable Tolerance: You can set the allowable amount packet loss/excess here. ¾ Total Packet Loss: If packet loss (including erro

5.33. CRC Error Test (CRC) _ PT2-CRC-1G (1000Mbps, Full Duplex) Layer 2 1000Mbps Full Duplex CRC check Performance Test is to find if DUT can filter

• Port Select…: Clicking this option will pop up a Port Select window allowing the selection of the ports to be used on the task. Please click the

3.2. NuServer Window Description Module Card Information This section displays the information regarding to the model cards that are installed on Nu

B. Media Type • Minimum Waiting Time: NuApps-MultiUnits-RM will halt at least for the Minimum Waiting Time you input here during auto-negotiation p

down below. • Packet Setting: You can set how packets will be transmitted in this field. ¾ Transmit by time: The system will transmit packet du

D. Learning • Enable Learning: As shown in the figures down below, enabling this function allows learning packets transmitted to the DUT before tes

E. Criteria • Allowable Tolerance: You can set the allowable amount packet loss/excess here. ¾ Total Packet Loss: If packet loss (including erro

5.34. CRC Error Test (CRC) _ PT2-CRC-10G (10Gbps, Full Duplex) Layer 2 10Gbps Full Duplex CRC check Performance Test is to find if DUT can filter and

• Port Select…: Clicking this option will pop up a Port Select window allowing the selection of the ports to be used on the task. Please click the

B. Media Type • Minimum Waiting Time: NuApps-MultiUnits-RM will halt at least for the Minimum Waiting Time you input here during auto-negotiation p

down below. • Packet Setting: You can set how packets will be transmitted in this field. ¾ Transmit by time: The system will transmit packet du

D. Learning • Enable Learning: As shown in the figures down below, enabling this function allows learning packets transmitted to the DUT before tes

E. Criteria • Allowable Tolerance: You can set the allowable amount packet loss/excess here. ¾ Total Packet Loss: If packet loss (including erro

3.3. NuApps-MultiUnits-RM Main Window Function Descriptions A Menu Bar The Menu Bar allows you to manage test model settings, view test log/ model i

6. Run Test, Test Result & Report When you finished with the previous settings, you will return to the Window task interface as shown down below:

When you click the button to start a task running, the Window task frame will blink green as shown down below: Meanwhile, a window will pop up fo

A. After finishing all task running, the button will be available again. You can click the button to restart the task running. B. This field

Note: Information and specifications contained in this document are subject to change without notice. All products and company names are trademar

3.3.1. Menu Bar NuApps-MultiUnits-RM Menu Bar includes configuration options such as File, Config, View, Security, Language, and Help. Please refer

B. Config Config Menu Bar Overview General Information Click the General Information option to pop up the Operation Dialog window. You may type info

View Menu Bar Overview Tool Bar Enable or disable this function to show or hide Quick Launch Buttons bar. For more details about the Quick Launch B

D. Security Security Menu Bar Overview Logout Logout from Admin Mode and switch NuApps-MultiUnits-RM to Operator Mode. Login/Change Account Login to

Revision History Date Version History 2012/04/02 1.0 First draft version 2012/04/26 1.1 1. Added new function Tool Bar on Menu Bar_View. (Page 2

E. Language Language Menu Bar Overview English/ Chinese Simplified NuApps-MultiUnits-RM has 2 different languages for its UI available. You can set

3.3.2. Quick Launch Buttons The Quick Launch Buttons allow you to Load/Reload DUT Model Settings, Connect to NuServer, or Lock a Module Card on the

3.3.3. Status Window Status Window FAB Shows the fabrication note. Station Shows the testing station. Operator ID Shows the user’s ID. DUT Shows the

3.3.4. Task Running Windows Task Running Windows A This field shows the current operating task. B This field shows the current status of your task.

4. Creating Task via New Model Wizard When performing tests on your DUT with NuApps-MultiUnits-RM for the first time, you have to create a new set of

4.1. Selecting Active Ports from Installed Module Cards A. Tree Style Tab Buttons These two buttons allow you to unfold/fold all the Active Port

C. DUT Model Name You can input DUT’s model name here in this field. Please note that a folder named after the model name you input here will be

4.2. Making Settings on Option – New Model Window An Option – New Model window will show up after you’ve selected module cards and Active Ports. The

4.2.1. Environment Settings To access Environment Settings and start configuring global settings of the test environment for all tasks, please click

A. DUT – Port Number You can view the number of active ports in this field. B. Model Name You can input or change DUT’s model name here in this

Date Version History 2012/09/05 1.3 1. Update General Information’s figure for selection of Pass/Fail/Pass rate/Start time/Duration. (Page 27) 2.

E. Auto Start NuApps-MultiUnits-RM will halt and wait for further instructions after the current running task is completed. You can click the check

G. Others settings If you enable the Upload Data to MES function, the Database Setup button will be available. Clicking the Database Setup button

4.2.2. Select Port Settings To access Select Port Settings, please click Select Port from the Configuration Tree Style Tab located on the left side

Select Port Settings The left field shows the ports of your XM-RM module cards available on each slot of your NuStreams-2000i/600i to choose. The

Select Port Settings Please refer to the right field, it is an example of selected ports. After the previous settings, please click OK button to c

4.2.3. Adding/Removing Tasks via Task List Setting To start managing tasks for your DUT, please click List of Selected Tasks on the left side of the

A. Task Add/Remove Buttons The Task Add/Remove Buttons allow you to add or remove tasks to/from Select Tasks. • By clicking button, you can ad

C & E. Selected Tasks All tasks you’ve selected from Built-in Tasks field will be listed in the Select Tasks. The number of the tasks you cho

4.2.4. Configuring Tasks Listed on List of Selected Tasks After choosing the tasks you would like to perform from Built-in Tasks as mentioned in “4.2

5. NuApps-MultiUnits-RM Detail Task Setting As mentioned in “4.2.4. Configuring Tasks Listed on List of Selected Tasks”, you can make detail settings

Table of Contents Foreword ...

Test Tasks – Layer 2 All the Layer 2 tasks settings can be set here. For available Layer 2 tasks and their descriptions, please refer to “1.2. Functi

To assign Active Ports as the Member Ports for Root, please click the Active Ports you would like to use as Member Ports, and then click the Æ button

B. Media You can set the media type for all the Active Ports that’s used for 1 to Many-UC test here. The configuration for Root Port and Member Port

C. Traffic You can make Up Stream and Down Stream packet transmitting settings for all the Active Ports that’s used for 1 to Many-UC test here. Th

D. Test Procedure • Enable Learning: By activating the Enable Learning function, the Frame Count and Tx Pkt Timeout function will be enabled. • Fr

5.2. Router-NAT This task allows the testing of the router’s functions. A. Port Map • Member Port: Ports are displayed in IDs in the format of (X, Y

B. Set • Packet Length Setting: As shown in the figure down below, in a standard Ethernet II frame, the Frame Length can be from 64~1518 byt

C. Test Procedure • Minimum Waiting Time: The minimum waiting time for link up. • Mediatype WaitingTimeout: The maximum waiting time for link up

5.3. Unicast Test (UC) _ PT2-UC-10H (10Mbps Half Duplex) Layer 2 10Mbps Half Duplex Unicast Performance Test is to transmit test streams via point to

• Port Select…: Clicking this option will pop up a Port Select window allowing the selection of the ports to be used on the task. Please click the

C. Packet ...66 D. Learn

B. Media Type • Minimum Waiting Time: NuApps-MultiUnits-RM will halt at least for the Minimum Waiting Time you input here during auto-negotiation p

down below. • Packet Setting: You can set how packets will be transmitted in this field. ¾ Transmit by time: The system will transmit packet du

D. Learning • Enable Learning: As shown in the figures down below, enabling this function allows learning packets transmitted to the DUT before tes

E. Criteria • Allowable Tolerance: You can set the allowable amount packet loss/excess here. ¾ Total Packet Loss: If packet loss (including erro

5.4. Unicast Test (UC) _ PT2-UC-10F (10Mbps Full Duplex) Layer 2 10Mbps Full Duplex Unicast Performance Test is to transmit test streams via point to

• Port Select…: Clicking this option will pop up a Port Select window allowing the selection of the ports to be used on the task. Please click the

B. Media Type • Minimum Waiting Time: NuApps-MultiUnits-RM will halt at least for the Minimum Waiting Time you input here during auto-negotiation p

down below. • Packet Setting: You can set how packets will be transmitted in this field. ¾ Transmit by time: The system will transmit packet du

D. Learning • Enable Learning: As shown in the figures down below, enabling this function allows learning packets transmitted to the DUT before tes

E. Criteria • Allowable Tolerance: You can set the allowable amount packet loss/excess here. ¾ Total Packet Loss: If packet loss (including erro

C. Packet ...108 D. Learni

5.5. Unicast Test (UC) _ PT2-UC-100H (100Mbps Half Duplex) Layer 2 100Mbps Half Duplex Unicast Performance Test is to transmit test streams via point

• Port Select…: Clicking this option will pop up a Port Select window allowing the selection of the ports to be used on the task. Please click the

B. Media Type • Minimum Waiting Time: NuApps-MultiUnits-RM will halt at least for the Minimum Waiting Time you input here during auto-negotiation p

number). If you choose fixed as your Frame Length, you can set the frame length in the field down below. • Packet Setting: You can set how packets

D. Learning • Enable Learning: As shown in the figures down below, enabling this function allows learning packets transmitted to the DUT before tes

E. Criteria • Allowable Tolerance: You can set the allowable amount packet loss/excess here. ¾ Total Packet Loss: If packet loss (including erro

5.6. Unicast Test (UC) _ PT2-UC-100F (100Mbps Full Duplex) Layer 2 100Mbps Full Duplex Unicast Performance Test is to transmit test streams via point

• Port Select…: Clicking this option will pop up a Port Select window allowing the selection of the ports to be used on the task. Please click the

B. Media Type • Minimum Waiting Time: NuApps-MultiUnits-RM will halt at least for the Minimum Waiting Time you input here during auto-negotiation p

number). If you choose fixed as your Frame Length, you can set the frame length in the field down below. • Packet Setting: You can set how packets

C. Packet ...150 D. Learni

D. Learning • Enable Learning: As shown in the figures down below, enabling this function allows learning packets transmitted to the DUT before tes

E. Criteria • Allowable Tolerance: You can set the allowable amount packet loss/excess here. ¾ Total Packet Loss: If packet loss (including erro

5.7. Unicast Test (UC) _ PT2-UC-1G (1000Mbps Full Duplex) Layer 2 1000Mbps Half Duplex Unicast Performance Test is to transmit test streams via point

• Port Select…: Clicking this option will pop up a Port Select window allowing the selection of the ports to be used on the task. Please click the

B. Media Type • Minimum Waiting Time: NuApps-MultiUnits-RM will halt at least for the Minimum Waiting Time you input here during auto-negotiation p

down below. • Packet Setting: You can set how packets will be transmitted in this field. ¾ Transmit by time: The system will transmit packet du

D. Learning • Enable Learning: As shown in the figures down below, enabling this function allows learning packets transmitted to the DUT before tes

E. Criteria • Allowable Tolerance: You can set the allowable amount packet loss/excess here. ¾ Total Packet Loss: If packet loss (including erro

5.8. Unicast Test (UC) _ PT2-UC-10G (10Gbps Full Duplex) Layer 2 10Gbps Full Duplex Unicast Performance Test is to transmit test streams via point to

• Port Select…: Clicking this option will pop up a Port Select window allowing the selection of the ports to be used on the task. Please click the

C. Packet ...192 D. Learni

B. Media Type • Minimum Waiting Time: NuApps-MultiUnits-RM will halt at least for the Minimum Waiting Time you input here during auto-negotiation p

down below. • Packet Setting: You can set how packets will be transmitted in this field. ¾ Transmit by time: The system will transmit packet du

D. Learning • Enable Learning: As shown in the figures down below, enabling this function allows learning packets transmitted to the DUT before tes

E. Criteria • Allowable Tolerance: You can set the allowable amount packet loss/excess here. ¾ Total Packet Loss: If packet loss (including erro

5.9. Flow Control Test (FC) _ PT2-FC-10H-100H (10Mbps Half ↔ 100Mbps Half) Layer2 10Mbps Half Duplex to 100Mbps Half Duplex Flow Control tests the pe

• Port Select…: Clicking this option will pop up a Port Select window allowing the selection of the ports to be used on the task. Please click the

B. Media Type • Minimum Waiting Time: NuApps-MultiUnits-RM will halt at least for the Minimum Waiting Time you input here during auto-negotiation p

• Packet Setting: You can set how packets will be transmitted in this field. ¾ Transmit by time: The system will transmit packet during the set a

D. Learning • Enable Learning: As shown in the figures down below, enabling this function allows learning packets transmitted to the DUT before tes

E. Criteria • Allowable Tolerance: You can set the allowable amount packet loss/excess here. ¾ Total Packet Loss: If packet loss (including erro